Hardwood floor refinishing cost in Alabama
Roughly a third of the cost of replacing — and in a Alabama house, often available under the carpet you already have.
The range, and why it is that wide
Installed in Alabama, refinishing existing boards runs roughly $3 to $8 a square foot, materials and labor together.
Most of the spread inside that range is about how much repair the floor needs before sanding — replacing damaged boards, filling, dealing with old adhesive — and whether you want a site-finished oil or a waterborne finish.
Against $6 to $21 to install new hardwood, refinishing is the cheapest good outcome available in an older Alabama house. It is only on the table if there is enough wood above the tongue left to sand: pull a floor vent and look at the cut edge before you budget for it.
An estimate, not a quote. These are planning ranges for Alabama, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
By city
| City | Labor region | Installed range |
|---|---|---|
| Birmingham | Birmingham / West Central | $3 – $8 |
| Montgomery | Montgomery / East | $3 – $8 |
| Mobile | Mobile / Baldwin | $3 – $8 |
| Daphne | Mobile / Baldwin | $3 – $8 |
| Huntsville | North Alabama | $3 – $8 |
| Madison | North Alabama | $3 – $8 |
| Tuscaloosa | Birmingham / West Central | $3 – $8 |
| Hoover | Birmingham / West Central | $3 – $8 |
| Auburn | Montgomery / East | $3 – $8 |
| Dothan | The Wiregrass | $3 – $7.5 |
| Decatur | North Alabama | $3 – $8 |
Only the labor half of each figure moves with the region. Material is a national commodity and costs the same in Dothan as it does in Hoover.
An estimate, not a quote. These are planning ranges for Alabama, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.